Thread Gage Purchasing Information

Special thread gages, pipe thread gages, and tri-roll gages are quoted per your specifications. Please contact us with your requirements.

Manufacturing time:

All of the thread gages priced on this website are normally in stock and can be shipped in 1-2 business days. However, there are times when a particular size may be out of stock.

To insure the size you require is currently in stock, please contact us.

F.O.B.:

  • Shipment will be from Kentucky. UPS Ground shipping time will be an additional 1 to 5 days to continental US locations, depending upon your location.
  • When ISO 17025 certifications are ordered, the gages will be shipped from the manufacturer to Wisconsin for certification. Then, the gages will be shipped to you from Wisconsin. UPS Ground shipping time from Wisconsin will be an additional 1 to 4 days to continental US locations, depending upon your location.

Shipping:

  • We will ship by UPS ground unless other shipping is requested

Marking:

  • Marking of the GO and NO GO sizes and class is included on every thread gage handle.
  • There is no extra charge for a single line of tool number or part number marking up to 25 characters. Additional marking is available for 25 cents per character.

Common options:

  • MIN/MAX depth steps on the GO member - add $30.00 per step ($60.00 per pair), within the standard GO member length. Depth steps add approximately 1 week to the manufacturing time.

Optional certifications:

For certification (non-ISO 17025):

  • For thread plug gages, add $12.00/member ($24.00 per GO/NO GO plug gage).
  • For thread ring gages, add $12.00/member ($24.00 per GO/NO GO thread ring gage set).

This certification adds approximately 5-7 additional business days to the manufacturing time.

For ISO 17025 certification:

  • For thread plug or setting plug gages, add $15.00/member ($30.00 per GO/NO GO gage), plus an additional $8.00 for the total order. There is a minimum charge of $45.00/order for this certification.
  • For thread ring gages, add $18.00/member ($36.00 per GO/NO GO gage set), plus an additional $8.00 for the total order. There is a minimum charge of $45.00/order for this certification.

This certification adds approximately 5-7 additional business days to the manufacturing time.

When ordering, specify the following for each thread gage:

Thread Plug Gages:

  • Thread size, pitch, and class (examples: 1/4-20 UNC-2B or M10x1.25-6H)
  • Style of plug gages - reversible, taperlock, or trilock
  • Specify MIN/MAX depth notches if you require them on thread plugs
  • Any additional marking
  • Any optional certification (make sure to specify if the certification needs to be to ISO 17025 specifications or not)

Thread Ring Gages:

  • Thread size, pitch, and class (examples: 1/4-20 UNC-2A or M10x1.25-6g)
  • Any additional marking
  • Setting plug (if you require one)
  • Any optional certification (make sure to specify if the certification needs to be to ISO 17025 specifications or not)

Send your purchase orders to netgages.com

© 2007-2011 Great Lakes Gage Sales, Inc. Site Map